TMS570LS0432: TMS570LS0432

Munesh Tripathi

Part Number: TMS570LS0432
Other Parts Discussed in Thread: UNIFLASH

Tool/software:

Hi TI team

We are using TMS570LS0432 MCU in one of our project. For mass production, we are looking for gang programmer. Request you to suggest the same.

Thanks

Munesh Tripathi

over 1 year ago

0 jagadish gundavarapu over 1 year ago

TI__Guru* 75466 points

Hi Munesh,

Munesh Tripathi said:
we are looking for gang programmer

Can you elaborate what is mean by gang programmer?

Usually, people use UNIFLASH tool with JTAG emulators (xds110, xds100, xds200, xds220, etc) for mass production.

Thanks & regards,
Jagadish.

0 Munesh Tripathi over 1 year ago in reply to jagadish gundavarapu

Prodigy 140 points

Gang programmer basically using for flashing firmware in a Panel (Set of boards) 1 by 1 - at a time.

like - MSP-GANG PROGRAMMER recommended by TI for MSP family.

0 jagadish gundavarapu over 1 year ago in reply to Munesh Tripathi

TI__Guru* 75466 points

Hi Munesh,

I think we don't have gang programmer for Hercules devices, I want to confirm this with my senior colleague once.

And i also found below thread with regarding gang programmer and here they provided some third-party vendor links:

(+) TMS570LS1227: Off-board gang programmer for TMS570 - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums

--
Thanks & regards,
Jagadish.

0 Munesh Tripathi over 1 year ago in reply to jagadish gundavarapu

Prodigy 140 points

Hi Jagadish,

Thanks for you immediate response. Please check with you team once and confirm.

I saw those threads. I don't know what is their credibility in TI terms. I will use whatever TI recommended.

Regards

Munesh Tripathi

0 jagadish gundavarapu over 1 year ago in reply to Munesh Tripathi

TI__Guru* 75466 points

Hi Munesh,

Apologies for the delay, i am just checking with my senior colleague. Still didn't get his response and i will update you ASAP.

--
Thanks & Regards,
Jagadish.

0 jagadish gundavarapu over 1 year ago in reply to jagadish gundavarapu

TI__Guru* 75466 points

Hi Munesh,

I just got the response from my senior colleague, and he is also saying that there is no gang programmer support from our TI side for Hercules devices.

And he said the customers will mainly use JTAG debuggers only for the code flashing purposes.

If you need gang programmer supports, then you should need to check with third parties like

dataio (Automated Device Programming & IoT Security Provisioning Solutions (dataio.com))

Algocraft

etc.

--
Thanks & regards,
Jagadish.