RM48L540: nowECC proble

Hi Leandro,

Can you please download nowECC from below link:

NOWECC Software programming tool | TI.com

And here is its user guide link:

nowECC Generation Tool User's Guide v2.22 (Rev. D)

--
Thanks & regards,
Jagadish.

Hello Jagadish,

Yes, I carried on that but it still not work. I am executing the .exe from windows and I tried to use the command prompt but it does not recognize the nowecc command. Thanks.

Regards,

Leandro

Thank yoiu Jagadish,

It solved my issue!

Regards,

Leandro

Good to hear that, Leandro.

It's all my pleasure!

--

Regards,
Jagadish.

Hello Jagadish,

Iwas trying to enter to privileged mode and write RAMOCCUR register. However, I cannot write it. During debugging session, in the line in whic I am trying to write the RAMOCCUR register, it sends me to b   _dabort in sys_intvecs.asm. I am using the following function to enter in privileged mode:

void enter_supervisor(void){
register uint32_t u32Mode = 0x13ul; /* Supervisor */
u32Mode = switchCpuMode(u32Mode);
ASSERT(0x1Ful == u32Mode);
}

However, I think I am not able to enter into privileged mode.

Thank you in advance.

Regards,

Leandro

Hello Jagadish,

It was solved. I was using FreeRTOS and I think after change to privileged mode, the scheduler takes the control and changes the program to user mode. So I executed the function to pass to privileged after executing the OS.

Thanks and regards,

Leandro