Part Number: MCU-PLUS-SDK-AM263X
Other Parts Discussed in Thread: AM2634, LP-AM263
Tool/software:
Hello,
for my application I want to use three MCAN modules.
The LaunchPad provides MCAN0 directly and MCAN1 by external pin mux on J7.63 and J7.64.
Furthermore the AM263x LaunchPad User Guide shows in table 4-25 "Pinmux Options for J7" that "MCAN3_RX" and "MCAN3_TX" can be made available on J7.69 and J7.70 in Mode0.
At the same time it claims that in Mode0 "ADC3_AIN2" and "DAC_OUT" (showing in green) are the Default signals J7.69 and J7.70. I assume something got twisted in this table because the pink Muxed alternative signals are shown in the Mode8 column and not as expected in the Mode0 column.
I refer to SPRUJ10D – MAY 2022 – REVISED SEPTEMBER 2023.
What ModeX and external pin mux do I have to chose to get access to MCAN1 and MCAN3 on J7 header or anywhere else on the LaunchPad?
Thanky you.
Antonius
