• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 51 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM263P4-Q1: CLKOUT0

teshima yohei
Prodigy 110 points
Part Number: AM263P4-Q1

Tool/software:

Hello

I would like to know about the CLKOUT0 output.

Technical Reference Manual: SPRUJ55B Table 6-28 states that XTALCLK can be selected as the clock source for CLKOUT0.

If the input to XTALCLK is 25MHz +50ppm, will the CLKOUT0 output also be 25MHz +50ppm?


Japanese memo

CLKOUT0の出力について知りたい。

テクニカルリファレンスマニュアル：SPRUJ55B　Table 6-28にCLKOUT0のクロックソースはXTALCLKが選択可能と記載がある。

XTALCLKへの入力が25MHz +50ppmだった場合、CLKOUT0の出力も25MHz +50ppmになるのか？

  • 0
    TI__Expert 3090 points

    Hi Teshima,

    TI does not define performance of the AM26x clock outputs because clock performance is influenced by many variables unique to each system implementation.

    You should plan to validate any clock output is able to meet the appropriate level of performance required by the attached device using your actual system design while operating across all operating conditions.

    Regards,
    Akshit