Hi,
I'm using LM3S8971(luminary) controller. I need some sample code to interface with EEPROM. please give me documents related to EEPROM interfacing.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I'm using LM3S8971(luminary) controller. I need some sample code to interface with EEPROM. please give me documents related to EEPROM interfacing.
Hi Radhika,
What type of EEPROM device and how do you intend to interface it with LM3S?
Regards
Amit
hi,
I'm using 25AA256 EEPROM using SPI communication. my controller is LM3S8971(luminary). send me sample code related it.
hi
please give me sample code i sent type of EEPROM and communication i.e., SPI communication.
and also provide documents related to it.
Hi Radhika,
You can refer to the existing examples for SPI in the StellarisWare installation for configuration of SPI peripheral. Since the EEPROM requires a long set of bits to be sent, please make sure that the CS is a GPIO and not coming from the SPI module and that your software makes sure that CS is low before transaction and HIGH after transaction.
Regards
Amit