I can't use blackhawk(usb100v2) jtag emulator to tm4c1231d5pm jtag interface.
It is blackhawk as blow
I finded jtag pin map from website as below.
However I can't find definite pin map for blackhawk(USB100v2).
So, I use ARM20-pin map that 1 expressed as below to TM4C1231D5PM Jtag pin
However. CCStudio appears error pop-up on screen as blow.
So, I use Compact TI 20-pin map that 2 expressed as above to TM4C1231D5PM Jtag Pin
However. CCStudio appears error pop-up on screen as blow.
I want to know that How to use Blackhawk(USB100v2) JTAG emulator interface to TM4C1231D5PM
If you have any questions or concerns please let me know