• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 228 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Simultaneous sampling on TM4C1233H6PGE Controller

Yash Dave
Intellectual 620 points
Other Parts Discussed in Thread: TM4C1233H6PGE

HI,

Can We do simultaneous sampling using TM4C1233H6PGE?

Regards,

Yash 

  • 0
    Guru 117850 points

    How about a definite, "maybe?"

    There are 2 ADC instantiations w/in that MCU - isn't that true?   Thus - if both are Timer triggered (for precision) - it may be possible to "sample the signal level" upon 2 different ADC channels, simultaneously.   (although there may exist some "narrowing of path" w/in the ADC - which precludes this)

    For sure - the 2 ADCs may be operated with (slight) phase separation - which comes very close to simultaneous.  This method is often employed to, "Double the effective sampling rate of the ADC."

    External to the MCU lurk signal processing requirements & implementations - and these are likely to cause (some) signal skew and/or delay - confounding the goal of (real) simultaneity...