• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 541 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TM4C129EKCPDT: I am looking for EKC-LM3S811 Kit

Allyson Wu
Prodigy 140 points
Part Number: TM4C129EKCPDT

Tool/software: Code Composer Studio

Hello, All:

I am using CCS6.0 to debug a existing project.  The project required to use TI EKC-LM3S811 as a emulator.  But this EKS-LM3S811 has already obsoleted.  

Can someone provide/sell me this emulator or a suggestion?  

Thank you

Allyson

  • 0
    Guru 117850 points

    Suspect that the project's "direction" to use EKC-LM3S811 as a "JTAG emulator" resulted from that project being VERY old!

    You most surely can employ the (very) available (and low cost) TM4C123 LaunchPad as a "JTAG Pod" (NOT an emulator) to (both) debug & program your TM4C129.    (such was (likely) NOT suggested in your (old/past) project as the TM4C "Did NOT YET EXIST!")

    Very REAL JTAG signal levels & timings are generated by the TM4C123 LPad - they are NOT being "emulated!"    (i.e. words/language HAVE meaning - far too many here "allow - thus enable" this misuse of emulator...)