Other Parts Discussed in Thread: HALCOGEN
hi sir,
i am using the TMS470MF06607 microcontroller.
for this micro if i set the baudrate in the HALCOGEN means the remaining values are calculated automatically.
ex : BRP , TIMEQUANTA , SYNC_SEG, PROP_SEG, PH_SEG1, PH_SEG2, SAMPLING POINT.
can you please provide any datasheet for how to calculate those values.
i tried to calculate those values, but it's match with that generated values.
can you please provide me any document for this calculation.
regards
Arun Kumar.N
