Tool/software: Code Composer Studio
enabling the ESM (Error Signaling Module) on the LAUNCHXL RM42 EVAL running the RM42L432 MCU caused the ESM to be latched. Once latched resetting the target does not remove the error; indicated by the Red LED on the target EVAL bd. Can't remove the ESM error because the host PC can't connect to the target while the error persists.
The ESM ERROR is apparently latched internally and does not respond to resets. If anyone knows how to remove the ESM device error, please reply.
Lloyd Allen
SMT ENGINEERING
work; 920.954.8324
cell; 318.719.2927