EK-LM4F120XL: How can I setup simulink pil target?

husam husam

Part Number: EK-LM4F120XL

Can some one help me with installing pil target,

I tried one available

but it seems I have wrong connectivity connection for Texas Instruments Code Composer Studio (IDE), Texas Instruments Code Composer Studio (TCP/IP), Texas Instruments Code Composer Studio (Serial), TI Stellaris LaunchPad connectivity using UART.

thank you.

over 5 years ago

0 Brian McKay over 5 years ago

Mastermind 9005 points

Hello,

This was built by someone in the MathWorks Community. You may wish to contact the author for more help.

It's also not clear to me if this solution supports PIL or not, but it might. Even if it doesn't you can look in the doc for info regarding setting this up yourself:

(links may require MathWorks login)

https://www.mathworks.com/help/ecoder/processor-in-the-loop.html

https://www.mathworks.com/help/ecoder/examples/configure-processor-in-the-loop-pil-for-a-custom-target.html

Good luck with your project!

-Brian