LM3S6911: Request for SW-LM3S (StellarisWare Complete) download.

Mcbukr

Part Number: LM3S6911

We use some Ethernet to RS485 converter boards based on LM3S6911 MCU and we need to modify its software. Unfortunatly, when we try to download SW-LM3S software kit, we see that it's removed for download since June 7th, 2018. Can anybody help us and give a link for SW-LM3S (StellarisWare Complete) download?

over 5 years ago

0 Ralph Jacobi over 5 years ago

TI__Guru*** 128115 points

Hello Alexey,

Stellaris Devices are NRND and StellarisWare is no longer offered by Texas Instruments. If you have previously used StellarisWare for development, please seek out a version downloaded by someone within your corporation. StellarisWare will not be provided on E2E as stated on the SW-LM3S page.

0 Mcbukr over 5 years ago in reply to Ralph Jacobi

Prodigy 25 points

Hi!

Sorry, but why I ask here about this file if I may simply go to someone within my corporation and bring it?

We haven't SW-LM3S file.

Maybe somebody here has it?

0 Ralph Jacobi over 5 years ago in reply to Mcbukr

TI__Guru*** 128115 points

Hello Alexey,

If you made a product using SW-LM3S and with LM3Sx devices then you should have it in house already. If you haven't, then you should not be designing with that part and use TM4C123x instead (or TM4C129x).

0 cb1_mobile over 5 years ago in reply to Ralph Jacobi

Guru 117850 points

If this vendor will 'allow' - my firm has, 'StellarisWare 9453' - the (last) version which covered (both) LM3S & LX4F.
Passing via the forum's 'PM' vehicle is our preference - again w/vendor's 'blessing.'

Arm-based microcontrollers

Arm-based microcontrollers forum

LM3S6911: Request for SW-LM3S (StellarisWare Complete) download.