RM46L850: USB CDC using RM46x launchpad

Vishwas Gunderi

Part Number: RM46L850
Other Parts Discussed in Thread: RM48L952

Hi experts,

I wonder if I can make use of USB CDC class demo application available for RM48L952 HDK to RM46 controller using USB transceiver.

Looking forward for your help

Thanks,

Vishwas

over 5 years ago

0 QJ Wang over 5 years ago

TI__Guru**** 199216 points

Hello Vishwas,

Please refer to the information in the following link:

https://processors.wiki.ti.com/index.php/HALCoGen_USB_Device_-_driver_%26_CDC_Class

0 Vishwas Gunderi over 5 years ago in reply to QJ Wang

Prodigy 210 points

QJ Wang,

Thanks, I have gone through it.

Currently we have RM46x Launchpads for development purpose , which will be replaced by RM48L952 controller IC in PCB assembly.

Intention is to communicate between PC and Hercules controller using USB module.

Looking to CDC class example, it is mentioned for RM48L952 HDK board, I want to know if there are any IC to interface with RM48L952 controller IC or any other hardware requirement for RM48L952 IC to implement USB CDC class.

Looking forward for help,

Regards,

Vishwas

0 QJ Wang over 5 years ago in reply to Vishwas Gunderi

TI__Guru**** 199216 points

Hi,

The RM48 HDK supports USB host and USB device. The USB connectors for both Host and Slave should be populated on the RM48x HDK. You don'y need other HW for implementing USB CDC class.

Arm-based microcontrollers

Arm-based microcontrollers forum

RM46L850: USB CDC using RM46x launchpad