This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Please advice which VCU device that compatible with a 380v motor.

Other Parts Discussed in Thread: TMS320F28375S-Q1, TMS320F28384D-Q1, TMS320F280025, TMS320F280045

Hi TI expert

Please advice which VCU device that compatible with a 380v motor.

Below link was provided.
https://www.ti.com/solution/vehicle-control-unit-vcu#referencedesigns

Best regards,

Thomas

  • Our MCU products can work with low or high-voltage motors, that depends on the interface circuitry to the inverter board.

    Per the link, there are two device families recommended

    TMS320F28375S-Q1 (F2837x series) is the most popular for electric vehicle traction control

    TMS320F28384D-Q1 (F2838x series) is a newer device similar but adds another CPU subsystem to help offload communications (Arm CM4)

    For smaller task oriented traction applications TMS320F280045 (F28004x series) and TMS320F280025 (F28002x series) would be good choices.