TMS320F28388D: How to use TIPD165 SDFM sample on F28388D ?

Hi Hidehiko,

Thanks for your question! We are currently looking for the correct expert, who will be able to assist you with this question.

Regards,

Vince

Hidehiko-san,

The people associated with that TIPD have left the company and currently there is very little that can be done to support you with the files associated with TIPD165.  What exactly are you trying to do in the end?  Are you needing support for configuring the SDFM of the TMS320F28388D or something more specific to the AMC1304M25?

Hi Tom-san,

Thank you for reply.

I actually plant to evaluate SDFM on F28388D.  

And I expect that TIPD165 is useful for our evaluation. It supports to change register settings and shows graph for output from SDFM.

We plan to prepare equipment(other equipment) for input signals to SDFM.

And we plan to use AM1304M25, too.

Is your support of TIPD165 with F28388D(EVM) very slow ?

Could you let us about actual situation of TIPD165 ?

Best regards,

Hidehiko

Hidehiko-san,

Support for TIPD165 is actually non-existent.  The code associated with TIPD165 was developed in 2014 for use on Win-XP/Win-7.  I personally do not know what version of Code Composer Studio or Control Suite was used at the time to create the code so I do not know if it would still work on a newer PC or with the current CCS or Control Suite tools.   I suspect this is part of the issue with "4.1 - b".   

Tom-san,

Thank you for your reply.

So far, TIPD165 is not officially supported on Win10.

Is it right ?

And C2000firmware on F28377x is provided but it is not for F28388x.

ICS_sdfm_filters_sync_cpu_cpu01v10.out

We need to change code of it for F28388x.

Best regards,

Hidehiko

Yes, that is correct.