TMDXIDDK379D: TMS320F28379D

Yongho Kim1

Part Number: TMDXIDDK379D
Other Parts Discussed in Thread: TMDSCNCD28379D, CONTROLSUITE

I have connected the TMDXIDDK379D and TMDSCNCD28379D.
I am using the project in the IDDK_PM_Servo_F2837x_v2_00_00_00 folder provided by controlSUITE.
When I run debug after compilation, 0x3FF16A (no symbols are defined) occurs.

None of the source files in the project have been changed.

Please give me some advice.
Thank you.

over 2 years ago

0 Whitney Dewey over 2 years ago

TI__Guru 50575 points

Can you confirm that the code is loaded correctly? For example, if you look up main in the disassembly window, does it show valid code?

What happens when you hit the Reset and Restart buttons? Can you get it to go to main()?

Can you share your "Program/Memory Load Options" and "Auto Run and Launch Options" configurations? Find them under Tools -> Debugger Options.

Whitney

0 Yongho Kim1 over 2 years ago in reply to Whitney Dewey

Prodigy 10 points

I don't know if it's a valid code, but it comes out like the picture.
During reset and restart, 0x3FF16A and 0x3FE493 are generated respectively.
As a special feature, when restarting, the boot28.asm file window appears briefly and the window changes to 0x3fe493.