DRV8301-69M-KIT: USB to CAN dongle

Mofu Drives

Part Number: DRV8301-69M-KIT

Hello TI,

We are working on CAN module in 28069F MCU which supports CAN-A but for secondary CAN node (CAN-B) we chose PCAN View (PEAK-SYSTEM). Which was suggested by TI team.

The cost of the dongle provided by PEAK-SYSTEM is little high. Can you suggest some low cost USB-CAN dongle which will support the system.

Thanks,

Vivishekh

over 2 years ago

0 Hareesh Janakiraman over 2 years ago

TI__Guru* 93995 points

Vivishek,

I have only used tools from PEAK & KVASER. I researched online and found tools available for as low as US$30. However, I am not sure if those tools also come with a GUI or if you need to write some utility yourself to transmit/receive frames. There are multiple tools available. I am afraid you need to research them and determine suitability. I regret I cannot help in this.

0 Mofu Drives over 2 years ago in reply to Hareesh Janakiraman

Intellectual 470 points

Thank you Hareesh Janakiraman.

C2000™︎ microcontrollers

C2000 microcontrollers forum

DRV8301-69M-KIT: USB to CAN dongle