This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F280025C: After a Software Reset the applicatino goes to an Interrupt

Part Number: TMS320F280025C

Hi,

I use the Control Card of TMS320F280025C and the switch to boot from flash are correct selected. The problem is that the application jumps after an reset to an Interrupt with the information (No symbols are defined). Have anybody has the same problem or can anybody help me with this issue?

Best Regards

Markus