TIDM-1007: On board charger 3.3KW with dc-dc out 60V-85V

Deepak Bansal1

Intellectual 300 points

Part Number: TIDM-1007
Other Parts Discussed in Thread: TIDM-02002, TIDA-010054

Hi,

1. AC-DC stage of 3.3KW we can use TIDM-1007

2. For DC-DC stage after that we need 60-85Vdc output. Is there any reference board available which we can use?

over 2 years ago

0 MatthewPate over 2 years ago

TI__Guru 71785 points

Deepak,

The primary owner of this reference design is out of the office, we're working to get another expert assigned to your post. I expect us to have a response no later than tomm(8/3).

Best regards,

Matthew

0 Deepak Bansal1 over 2 years ago in reply to MatthewPate

Intellectual 300 points

Hi Matthew,
Thanks for replying. Will wait.

0 Manish Bhardwaj over 2 years ago in reply to Deepak Bansal1

TI__Mastermind 43730 points

we do not have a 3.3kW reference design for OBC DC-DC.

We have 6.6kW TIDM-02002

10kW TIDA-010054

You can use either of those to scale the design to 3.3kW

We have done a single controller based demo for 6.6kW

https://training.ti.com/66-kw-obc-gan-and-c2000-real-time-mcus-demo

but full design is not release yet.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TIDM-1007: On board charger 3.3KW with dc-dc out 60V-85V