Other Parts Discussed in Thread: LAUNCHXL-F280049C
Hello,
We are currently investigating implementing dual motor control using the 56 (RSH) version of the F280049C MCU, and have a coupe of questions:
1. We have seen lab 11 as a reference for testing the software, but is there a reference design for this type of implementation that we could follow on the hardware side?
2. Given the RSH only has 12 ADC pins, we would need to use an external ADC to sense bus voltage, keeping (phase voltages and currents on the ADCs internal to the MCU). Do you have any references for synchronizing the bus voltage sense with the internal ADCs?
Thanks