TIDM-1000: Developing a PFC and THD controller

Pablo Pérez

Part Number: TIDM-1000

I need to contact someone here in mexico to help us to assist us to select a microcontroller for a project we are developing. we are a company in Monterrey N.L. who want to develop a power factor and harmonics controller for industrial use. we were looking Vienna rectifier board and we think we can use it as reference. we need  developing board, sofware tools and programmer tools

over 2 years ago

0 MatthewPate over 2 years ago

TI__Guru 71815 points

Pablo,

We should be able to reply back by tomm, we had some local issues with the weather here in Texas that slowed our regular cadence a bit. Thanks for your patience here.

Best,

Matthew

0 Pablo Pérez over 2 years ago in reply to MatthewPate

Prodigy 30 points

Hello, I am still waiting for your replay

0 Michael-EPD Wang over 2 years ago in reply to Pablo Pérez

TI__Prodigy 242 points

Hello Pablo,

I am sorry for a belated response on this thread. I just sent you a friendship request and hope to understand more about your technical requirements. F2838x, F2837x and F28004x C2000 microcontrollers are supported in TIDM-1000 reference design. Thank you.

Best Regards,

Michael Wang

0 Pablo Pérez over 2 years ago in reply to Michael-EPD Wang

Prodigy 30 points

Hello Michael, we are starting a new project in our company, we want to develop a harmonics and power factor controller. we think TI microcontrollers are good for this. So our question is if you do have support in mexico for us. We are not new using microcontroller but never used TI, so I want to understand what we need in terms of resources (tools, software, etc).

Thanks,

Pablo Pérez

C2000™︎ microcontrollers

C2000 microcontrollers forum

TIDM-1000: Developing a PFC and THD controller