This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28379D-Q1: Motor Control Unit

Part Number: TMS320F28379D-Q1

Hello ,

I am looking to design a motor control unit which can drive two BLDC motors with hall sensors connected.

I intend to develop the Control Algorithm using Model Based Design via MATLAB tools, hence a Simulink support package is preferable. 

I am looking for a Motor Controller Board and Driver( I think you call it BoosterPack?)

The Controller should typically have peripherals like ADC, CAN, Quadrature Encoder and PWM primarily. USB peripheral is also preferable. 

Can you please recommend a suitable product for the same? 

The details of the BLDC motor are as follows - 

  • Type: Permanent Magnet BLDC 
  • Voltage (Volts): 48/60
  • No load Current (Amperes):- 6 
  • Rated Current (Amperes): 67
  • Peak Current (Amperes): 100 
  • Rated Speed (RPM) : 2500±100 / 3000±100

    Hall sensor
  • Operating Temperature (℃):- -20 to 80
  • Hall Sensor arrangement:-(Three sensors at 120 electrical degrees)
  • Type:- Bipolar Hall Effect Digital Position Sensor IC (SS41)
  • Wide operating Voltage Range (Volts):- 4.5 to 24
  • Very low current consumption (Mille Amperes):- 20