This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28386S: epwm ex1 trip zone X-BAR use

Part Number: TMS320F28386S

Hi, I am going thrue the examples ...

On this example, on board.c, the input X-BAR is configured that INPUT1 is GPIO12.

I can't find where the X-BAR INPUT0 is configured to ePWM TZ event.

Please help so I can better understand the configuration of the X-BAR.