Hi everyone
We are going to use SM320F28335 for DC-DC (phase-shifted full-bridge topology). But our device has to certify by DO-178C.
Could we do it if we use Matlab toolboxes without C/C++?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi everyone
We are going to use SM320F28335 for DC-DC (phase-shifted full-bridge topology). But our device has to certify by DO-178C.
Could we do it if we use Matlab toolboxes without C/C++?
Kostya,
I'm going to reference this page from Mathworks site https://www.mathworks.com/solutions/aerospace-defense/standards/do-178.html it appears this possible. If you have a specific question on the MW toolchain you could ask the MW team on their support forum, as you would get a more precise answer their.
Let me know if I can be of more help.
Best,
Matthew