TMS320F28386S: Using SysConfig with dual core devices

Nir Givon

Intellectual 345 points

Part Number: TMS320F28386S
Other Parts Discussed in Thread: SYSCONFIG, C2000WARE

Is there any documentation / guidelines for using SysConfig with devices with dual cores?

Dose SysConfige has settings for assigning pins/periferals to slave core (M4)?

Also, after selecting 28386S device, I cant find a way to configure analog inputs.

Thanks!

over 2 years ago

0 Nima Eskandari over 2 years ago

TI__Guru 51940 points

We are currently working on the dual core support.

The latest release of sysconfig only supports CPU1 (c28x) configuration.

For analog input configuration, make sure you are using CCS11 + C2000WARE 4.0 and take a look at the ADC examples in the driverlib folder of your F2838x device.

Nima

0 Nir Givon over 2 years ago in reply to Nima Eskandari

Intellectual 345 points

Thanks!

The examples show how the ADC is configured using SysConfige.

How are GPIO's configured as analog within SysConfig?

0 Nima Eskandari over 2 years ago in reply to Nir Givon

TI__Guru 51940 points

Which GPIOs? There are no GPIOs on the Analog pins on this device.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28386S: Using SysConfig with dual core devices