• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 81 subscribers
  • Views 209 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

INSTASPINUNIVERSALGUI: use with CCSv7

INSTASPINUNIVERSALGUI: cannot install css app - in particular gui composed

David Disbrow
Prodigy 30 points
Part Number: INSTASPINUNIVERSALGUI
Other Parts Discussed in Thread: CCSTUDIO, , LAUNCHXL-F28027, MOTORWARE

I'm try to run the gui composer from CCSv10. I'm working on a Windows 11 system.

From the  related thread I saw from the CSS you click on View/CCS Apps Center and search for GUI

That all went find but when I click the install software button there is an error and when I view the error log this is what I find

!ENTRY org.eclipse.equinox.p2.core 4 0 2021-12-14 10:22:33.402
!MESSAGE Unable to parse [http://software-dl.ti.com/dsps/dsps_public_sw/sdo_ccstudio/guicomposer/v7.2/all_extras_repo/ into an URI: Illegal character in scheme name at index 0: [http://software-dl.ti.com/dsps/dsps_public_sw/sdo_ccstudio/guicomposer/v7.2/all_extras_repo/.

!ENTRY com.ti.ccstudio.app.center 1 0 2021-12-14 10:22:33.408
!MESSAGE Failed to install the selected add-ons. installIUs=[org.eclipse.wst.jsdt.feature.feature.group, com.ti.gc.common.feature.group, com.ti.ccstudio.gui.composer.ccs.feature.group] repos=[http://software-dl.ti.com/dsps/dsps_public_sw/sdo_ccstudio/guicomposer/v7.2/all_extras_repo/, http://software-dl.ti.com/dsps/dsps_public_sw/sdo_ccstudio/guicomposer/v7.2/gcRepo/, http://software-dl.ti.com/dsps/dsps_public_sw/sdo_ccstudio/guicomposer/v7.2/gc-ccsRepo/]

How can I proceed?

Thanks

  • 0
    TI__Guru 50595 points

    What C2000 device are you using?

    INSTASPINUNIVERSALGUI uses a pretty old version of GUI Composer, so I'm doubtful of its compatibility with newer versions of CCS like v10 or v11. Are you able to run the GUI standalone without CCS?

    Whitney

  • 0
    Prodigy 30 points

    The target is the LAUNCHXL-F28027.   I'm surprised I can't even download it from the  CSS Studio Apps in the first place.   I didn't have much luck running it in standalone mode but I'm not sure I understood the directions I had to do that.   Maybe you know of good instructions. Thanks

  • 0 in reply to David Disbrow
    TI__Guru 50595 points

    The only document I'm aware of is C:\ti\motorware\motorware_1_01_00_18\docs\guis\universal\qsg_gui_universal.pdf

    There's a section in there about using the standalone GUI. Is that what you were trying to use before? What issues did you run into?

    Whitney