C2Prog is version 1.8.11-7. Bootloader obviously downloads ok, is this most likely a comms problem when you switch the baudrate up to 115200? Any way to leave the baudrate at whatever it is that the bootloader downloads at? Thank you!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
C2Prog is version 1.8.11-7. Bootloader obviously downloads ok, is this most likely a comms problem when you switch the baudrate up to 115200? Any way to leave the baudrate at whatever it is that the bootloader downloads at? Thank you!
Erik,
Yes, it can be the higher baud that is causing it for your HW setup.
Below are taken from CodeSkin's C2Prog FAQ: www.codeskin.com/c2prog-faq
If you need support for lower baud communication, please contact CodeSkin directly at info@codeskin.com.
Thanks and regards,
Vamsi