TMDSHVMTRINSPIN: Motor open loop testing ,Motor identification, speed controlling codes in one main

DRIVE SMART

Part Number: TMDSHVMTRINSPIN
Other Parts Discussed in Thread: C2000WARE

Hello team ,

Greetings of the day,

We are using c2000ware instapin source libraries for our motor running, each source file for specific purpose like "is03" for open loop testing "is04" for current feed back , "is05" for motor identification, "is07" for speed controlling, but Now we need to implement the all labs in one source file is it possible to do this ?, if possible please give us suggestions .

thanks & regards

Rajeswari

over 2 years ago

0 Navaneeth Narayanasamy over 2 years ago

TI__Intellectual 2890 points

You could use #if statements to combine all the labs and compile only selected labs. Alternatively hooks can be added to super set file - "speed control" which has all the blocks and enable those on need basis during run time.

0 DRIVE SMART over 2 years ago in reply to Navaneeth Narayanasamy

Intellectual 915 points

Hi,

Thanks for the reply, we are able to merge only open loop (is03) with is07,by using if condition,but it is not working for lab05((motor identification).

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMDSHVMTRINSPIN: Motor open loop testing ,Motor identification, speed controlling codes in one main