• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 81 subscribers
  • Views 114 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMS320F28033-Q1: TMS320F28035 to be used with same SW build

TMS320F28033: Different between TMS320F28033 and TMS320F28035

Andy Liu3
Intellectual 2500 points
Part Number: TMS320F28033
Other Parts Discussed in Thread: TMS320F28035

Hi team，

Due to supply issue, my customer want to use TMS320F28035 replace TMS320F28033, I see at datasheet they have different flash, Apart from this difference, what other differences are there between them, and whether they can be directly replaced by FW, thank you.

Best regards，

Andy Liu

  • 0
    TI__Guru** 118000 points

    Andy,

    They are the same device. Only difference is F28033 has only half the flash enabled for customer use and they will have different part ID numbers in the register. Yes, unless part ID register is used in customer firmware an F28035 can be used as direct drop in replacement.