Other Parts Discussed in Thread: TMDSCNCD28388D
I have been using the TMS320F28388D Control Card (part no. TMDSCNCD28388D) to develop a new application. I am now transitioning the application to a new target board.
I'm considering using the XDS110 JTAG Probe with the CTI-20 to TI 14-pin adapter to program the TMS320F28388D flash on the new target board.
Here is the connection arrangement I'm planning to use:
TMS320F28388D pin Connects to XDS110 14-pin adapter pin
TCK SWCLK/TCK (pin 11)
TDI TDI (pin 3)
TDO TDO/SWO (pin 7)
TMS SWDIO/TMS (pin 1)
TRSTn TRSTn (pin 2)
VSS GND (pins 8, 10, and 12)
No connection TDIS (pin 4)
No connection VTREF (pin 5)
No connection KEY (pin 6)
No connection RTCK (pin 9)
No connection EMU0/TRIGOUT0
No connection EMU1/TRIGOUT1
Does this look correct for programming the TMS320F28388D Flash from the XDS110 using the 14-pin connector?
