Hi,
When using the C++ perspective on CCS, There are Both "Run" & "Debug" Options.
I was not able to find a description of the differences between the two.
Hopefully we can get an explanation to the difference?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
When using the C++ perspective on CCS, There are Both "Run" & "Debug" Options.
I was not able to find a description of the differences between the two.
Hopefully we can get an explanation to the difference?
Hi Nir,
Please take a look at CCS User's Guide:
https://software-dl.ti.com/ccs/esd/documents/users_guide_11.2.0/ccs_debug-main.html
Refer to Section 7.2.1.5 for debug.
Debug button, launch the active target configuration, and load the out file to the target and then halt at main() function.
Run icon does free run.
Thanks & Regards,
Santosh