DRV425EVM: Design help recommendation

ArTzy

Part Number: DRV425EVM
Other Parts Discussed in Thread: DRV425

Hi Experts,

Good day. Seeking your assistance on this query:

hello i have purchases the DRV425evm, i am using it in a project to detect the magnetic field of cables used in residental homes. the microcontoller i am using is the arduino uno r3 and it has a insufficents ADC i was wondering based off the other questions which is recommended as i would like to use it for digital filtering and the DRV425evm is being used in a differential mode. for the filtering i would need to isolate the 60hz signal and i understand a bandpass filter would be best for this application however signal processing is not my strong suit, what would you recommend? meaning i have two. do you think you can assist me with this?

Thank you.

Regards,
Archie A.

over 2 years ago

+1 Javier Contreras4 over 2 years ago

TI__Mastermind 30750 points

Hello Archie,

I can assist with the use of the DRV425 but digital filtering would or signal processing is more of a question for the signal processing team. They are not using our processor so I don't know how much that team can help.

For use of the 2 DRV425 the user need to be aware about placement and the fields seen by each DRV425. If placed correctly one could use one voltage that combines the signals as mentioned in this document.

0 ArTzy over 2 years ago in reply to Javier Contreras4

TI__Genius 16630 points

Hi Javier,

Thanks for this information. We'll be waiting for the response from the MCU team.

Regards,
Archie A.

0 Javier Contreras4 over 2 years ago in reply to ArTzy

TI__Mastermind 30750 points

Hello Archie,

Are you starting another thread? They will not normally look at this thread unless we transfer to their group. Otherwise they will not see this thread.

0 ArTzy over 2 years ago in reply to Javier Contreras4

TI__Genius 16630 points

Hi Javier,

I am looking solutions from C2000 MCU team, hope they'll support this query.

Thanks for your prompt response.

73,
Archie A.

0 ArTzy over 2 years ago in reply to ArTzy

TI__Genius 16630 points

Hello Javier,

I created a separate thread for this:

Would you recommend microcontroller for digital filtering and the DRV425evm is being used in a differential mode? - MSP low-power microcontroller forum - MSP low-power microcontrollers - TI E2E support forums

Thanks again.

Regards,
Archie A.

C2000™︎ microcontrollers

C2000 microcontrollers forum

DRV425EVM: Design help recommendation