Because of the Thanksgiving holiday in the U.S., TI E2E design support forum responses may be delayed the week of Nov. 21. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

C2000-GANG: C2000-Gang error

Part Number: C2000-GANG


We use the C2000-Gang for many years.

Last week, I tried to erase/Load new image

But I get a problem.

Each time I Try to "Save To Image" to put .S19 into the Gang programmer, All seems ok into the GangProgrammer PC software, but on gang LCD, it is display "Image 01 (Err!)"

After that, there is some strange image name (see image 12)

Now, I made erase on all image, but name always appears into the list on PC software.

On the Gang, all image are empty.

I try to flash the gang firmware again hopping all will be reset. But no..

Before try to set a new image, the gang began to not work properly and get error number 23 (or maybe 27 I'm not sure now)

Please can I have some help?