The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

F28M35H52C: REVB EPI0 configuration

Part Number: F28M35H52C

Hi Team,

Good day! Could you help us with the customer's concern below? 

1. F28M35H52C1 REVB EPI0S34 ~ EPI0S41:  

A11 corresponds to EPI0S36 when Table19-7 introduces EPI HB16(mode-ADNOMUX), but neither Table4-1 nor Table4-2 has any GPIO that can be set to EPI0S36 functionality. To use HB16(mode-ADNOMUX), how do you set up the GPIO pin corresponding to EPI0S36?

2. How to configure C28 to write EPI extended external RAM? Currently, my C28 can only read EPI-extended external RAM。

Thank you in advance. 

Best regards,

Jonathan