Other Parts Discussed in Thread: UNIFLASH
We found function fail step flash Bootloader file on IC TMS320F28377D-Q1.
In adding, we have confirmed manual flashed program by “UniFlash” program but the program still shown failed.
Please support to analyze fialure as below code.
UniFlash message
[8/16/2022, 3:52:48 PM] [INFO] C28xx_CPU1: GEL Output: Memory Map Initialization Complete
[8/16/2022, 3:52:49 PM] [INFO] C28xx_CPU1: If erase/program (E/P) operation is being done on one core,
[8/16/2022, 3:58:38 PM] [INFO] C28xx_CPU1: GEL Output: Memory Map Initialization Complete
[8/16/2022, 3:58:40 PM] [ERROR] C28xx_CPU1: Error: (Error -1135 @ 0xC095) The debug probe reported an error.
[8/16/2022, 3:58:40 PM] [ERROR] C28xx_CPU1: Trouble Halting Target CPU: (Error -1044 @ 0x0) The debug probe reported an error.
[8/16/2022, 3:58:40 PM] [ERROR] C28xx_CPU1: Error: (Error -1135 @ 0xC095) The debug probe reported an error.
[8/16/2022, 3:58:41 PM] [ERROR] C28xx_CPU1: Unable to determine target status after 20 attempts