• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 81 subscribers
  • Views 146 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDM-1001: Changes required for 65V input , 400V output Design

BJE
Prodigy 130 points
Part Number: TIDM-1001

Hi 

I am interested to  modify this design with the following specifications - 

  • Input : 65V +/-1 V ( the modified TIDM 1001 will regulate the input voltage for this application )
  • Output : 400V ( an external load will regulate the output voltage at 400V  )
  • Power :500W 

I want this DC-DC converter to regulate the input voltage to 65V +/1 V   , an external load module will regulate the output voltage to about 400V 

Can you summarise the changes that will be required especially to the resonant components , the transformer and the software ?

How much work will be required make these changes ? 

Regards

BJE 

 

  • 0
    TI__Intellectual 1200 points

    Hi,

    The resonant tank seems needing a redesign, you might want to check the switches voltage rating at the low voltage side. maybe adc conditioning circuit too.  Software-wise, you may want to tune the control parameter if necessary.

    I cannot give an estimate of work or time.

    Thanks.