This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28069: Can we use HRCAP 1-4 for calibration in F2806x ?

Part Number: TMS320F28069

My understanding is that in High-resolution capture mode for TMS320x2806x, one HRCAP module which is connected to the HRCAP Calibration input is not available to capture pulse widths during calibration.

on Page 414 in the document :*TMS320x2806x Microcontrollers Technical Reference Manual (Rev. I) (, it is mentioned that HRCAP 1 and HRCAP 2 can be used for the calibration.

I wanted to confirm if HRCAP 3 and HRCAP 4 can also be used for the calibration.