This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSECATCNCD379D: tmdsecatcncd379d


i want to generate pwm signals at pwm 2a and pwm 2b, based on the polarity of a sine wave. 2a should be off for positive half cycle, when 2b is on. The reverse happens during negative half cycle. Both are complementary signals. But i am getting some glitches at 2a during negative half cycles. these are not noise.

Could u pls help me figure out what is going wrong. I can share the code snippets if required.

Thank you.