LAUNCHXL-F280039C: InstaSPIN FOC : Indentifier Not Found (Launch-xl F280039C and DRV8316R)

Yassine Damoh

Part Number: LAUNCHXL-F280039C
Other Parts Discussed in Thread: C2000WARE-MOTORCONTROL-SDK, C2000WARE

Hello,

I'm trying to use InstaSPIN FOC with the Launch-xl F280039C and DRV8316R evaluation module to drive a small PM motor.

Once the hardware is connected, none of the identifiers are found. Please check the below screenshot.

Thank you for your support.

Yassine

+1 Yanming Luo over 1 year ago

You have to run the lab within CCS, the GUI doesn't support this Launch-xl F280039C with DRV8316R.

You may refer to the lab in motor control SDK. The universal motor control lab is available in the current MCSDK, which can support a set of hardware kits and control algorithms for BLDC/PMSM drive. The kits include LAUNCHXL-F280025C, LAUNCHXL-F280039C, LAUNCHXL-F2800137 with BOOSTXL-DRV8323RS, BOOSTXL-DRV8323RH, DRV8353Rx-EVM, BOOSTXL-3PHGANINV, DRV8316REVM, or DRV8329AEVM inverter board for low voltage motor (max: 100Vdc) . TMDSCNCD280025C, TMDSCNCD2800137 , or TMDSCNCD280039C with TMDSHVMTRINSPIN inverter board and TMDSADAP180TO100 for high voltage motor (max 350Vdc). And The control algorithms include sensorless InstaSPIN-FOC with FAST, Sensorless-FOC with eSMO, Sensored-FOC with incremental encoder, Sensored-FOC with hall sensor.

Universal Project and Lab User’s Guide: https://www.ti.com/lit/spruj26

Example lab project at the folder: C:\ti\c2000\C2000Ware_MotorControl_SDK_<version>\solutions\universal_motorcontrol_lab\f28002x

or C:\ti\c2000\C2000Ware_MotorControl_SDK_<version>\solutions\universal_motorcontrol_lab\f28003x

or C:\ti\c2000\C2000Ware_MotorControl_SDK_<version>\solutions\universal_motorcontrol_lab\f280013x

C2000 microcontrollers forum