i want to ask which registers i must change to create a signal PWM but the state in high the value is -5V and the state in low is 0V, i am using a microcontroller tms320f28069PZT
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
i want to ask which registers i must change to create a signal PWM but the state in high the value is -5V and the state in low is 0V, i am using a microcontroller tms320f28069PZT
This MCU is a device with 3.3v I/O. The outputs only switch between 3.3v and 0v.