TMS320F28075: combine boot.hex & app.hex to allone.hex

Hi,

I will check on this and get back to.

Regards,

Rajeshwary

i try use srecord intel16 combine boot.hex & app.hex ,that show error

.\srec_cat.EXE gpio_ex2_toggle.hex -INtel_HeXadecimal_16 -exclude 0x0000 0x07FFFF -exclude 0x84000 0x87FFF  F28076_urm88000.hex -INtel_HeXadecimal_16 -exclude 0x0000 0x083FFF -exclude 0x8C000 0x8CFFF -output ALL.hex -INtel_HeXadecimal_16

but use uniflash download  gpio_ex2_toggle.hex and F28076_urm88000.hex was worked

Hi Jaures,

I am not sure about srec_cat.EXE utility and how it combines 2  hex files. 

But using Hex2000 utility you can combined 2 out files into one as below

hex2000.exe --load_image app_1.out app_2.out --load_image:file_type=executable -o app_combined.out
where app_1.out and app_2.out have respective linker command files that are
setup without conflicts (e.g. overlapping regions). 

you can refer below e2e link example in this e2e user combined bootloader.out with application.out

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/965659/compiler-tms320f280049-combining-executables

Regards,

Rajeshwary

try 

PS C:\Users\jaures_hsieh\workspace_v12_A\gpio_ex2_toggle\CPU1_FLASH> C:\ti\ccs1200\ccs\tools\compiler\ti-cgt-c2000_22.6.0.LTS\bin\hex2000.exe --load_image gpio_ex2_toggle.out F28076_urm88000.out --load_image:file_type=executable -o app_combined.hex

Setting --load_image:combine_sections=true
error: memory ranges "image_1" and "image_2" out of order
error: memory ranges "image_3" and "image_4" out of order

Hi Jaures,

"out of order" typically occurs when there is overlap in the memory ranges used by the input files. 

Can you please check your files for overlaps?

Regards,

Rajeshwary