Hi Team,
The customer wants to know what control theory is used in the vienna rectifier to control the PWM.
Could you help check this case?
Thanks & Regards,
Ben
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
The customer wants to know what control theory is used in the vienna rectifier to control the PWM.
Could you help check this case?
Thanks & Regards,
Ben
Hi,
The expert is out of the office. Please expect delay in response.
Thanks.
Hi Pranali,
Is the expert back yet?
May I know there are any updates?
Thanks & Regards,
Ben
Hi Ben,
TIDM-1000 uses two loop control (voltage loop and current loop). You can check the paper listed in the reference section in the user guide. Thanks.
Regards,
Chen
Hi Chen Jiang,
Customer says it just describe voltage loop and current loop control, but have not describe how PWM is generated and how it is controlled.
Best Regards,
Ben
Hi Ben,
Pls check the training video as below and see if that helps.
https://www.ti.com/video/5335405016001?keyMatch=VIENNA%20RECTIFIER
Regards,
Chen