TMS320F280037: TMS320F280037

David Hirst

Part Number: TMS320F280037
Other Parts Discussed in Thread: SYSCONFIG, , C2000WARE

Is there a tool to allow for visual configuration of the of the GPIO mux pins to ensure fits the part? I have used one in the past but I cannot remember if it was a TI tool

over 1 year ago

0 Nishka Rao over 1 year ago

TI__Prodigy 691 points

Hi David,

Are you looking for the Sysconfig Pin Mux tool?: https://www.ti.com/tool/download/SYSCONFIG

0 David Hirst over 1 year ago in reply to Nishka Rao

Intellectual 340 points

in sysconfig I start a new design and try to select TMS320F280037 from the drop down but it is not listed. Is there a later version of this tool ore an I misunderstanding my choices?

+1 Nishka Rao over 1 year ago in reply to David Hirst

TI__Prodigy 691 points

The C2000 Parts are confusingly listed under F28xxxx; so the TMS320F280037 would have the drop down of F28003x.

0 Santosh Jha over 1 year ago in reply to David Hirst

TI__Guru 50430 points

David,

What is CCS version and C2000Ware SDK you are using?

Recommended:

CCS 12.2
C2000Ware 4.03.00.00

It is better to start with empty sysconfig project. It will setup the project properties correctly.

C:/ti/c2000/C2000Ware_4_03_00_00/driverlib/f28003x/examples/empty_projects

Regards, Santosh

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280037: TMS320F280037