TMS320F28069M: Searching for an ideal example code regarding slave functionality with on chip USB port.

Heervesh Lallbahadur

Part Number: TMS320F28069M
Other Parts Discussed in Thread: C2000WARE

Searching for an ideal example code regarding slave functionality with on chip USB port.

Basic idea:

I want to transmit data from the microcontroller (slave) to a device(Master) using the USB port. I want to find the simple solution code or main idea on how to do the coding.

Any references or idea will be appreciated.

Thank you beforehand.

SIncerely

Heervesh

11 months ago

0 Siddharth Deshpande 11 months ago

TI__Mastermind 30725 points

Heervesh,

You can take a look at the USB examples provided within C2000Ware. The examples are available at <C2000Ware>\device_support\f2806x\examples\c28 folder.

Best Regards

Siddharth

0 Heervesh Lallbahadur 11 months ago in reply to Siddharth Deshpande

Prodigy 20 points

Hi Siddharth,

Thank you so much for the response. I have just check it. Do you think USB_DEV_SERIAL is a good example to use as guideline or do you have another suggestions which might have an easiest approach?

0 Siddharth Deshpande 11 months ago in reply to Heervesh Lallbahadur

TI__Mastermind 30725 points

Heervesh,

If you are using F28069M as a USB CDC class , then you can refer the usb_dev_serial example. This creates a Virtual COM Port to communicate with the PC. Which board are you trying to create your example on?

Best Regards

Siddharth

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28069M: Searching for an ideal example code regarding slave functionality with on chip USB port.