TMS320F28069F: Question about softwatre

Do you mean the MOTORWARE software? The website appears to be working now.

Hi Kier,

I meantion about the MOTORKITSCNCD69MISO.Pls check this .Thanks!

https://www.ti.com/tool/MOTORKITSCNCD69MISO

Jenson

Ah. I see the problem too, apologies.

No Problem, just want to check when I can download and use this. I have to test this in thi two day.

Thanks!

I had a quick sweep of our servers but I could not find a copy. I guess you'll have to wait until TI US wakes up. Please reject my previous answer so that it appears unanswered.

OK, I will wait for further feedback.Thanks!

Hi Yanming,

I encountered this problem in the process of using motorware, I think I need to download https://www.ti.com/tool/MOTORKITSCNCD69MISO to be able to start this GUI to control the hivkit.

And I try to use the universal GUI,but it can not connectt.

Thanks!

Jenson

Maybe this thread has a solution for the universal GUI problem:

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/721077/tmdscncd28027-error-connecting-to-target-emulation-failed

Hi Kier,

Thanks for your feedback, I use the 28069M control card, and I connect the control card with PC, is this correct?

Thanks!

Jenson

Sounds correct to me.

Are you able to connect and debug your controlCARD through CCS when you use the XDS100v2 port?

YES,you are right

In that case, I see no reason why the universal GUI wouldn't work. Yanming Luo over to you I think.

Thanks, become other colleague download the  https://www.ti.com/tool/MOTORKITSCNCD69MISO before and he can start the GUI. So one solution maybe I need to download this and try.But I don't know why we can not download this now.

other way is I can use universal lab SDK , I have already applied TMDSCNCD280025C+TMDSADAP180TO100 but this need some time.

If there is any other way please let me know

thanks!

Jenson