• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 83 subscribers
  • Views 166 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIEVM-VIENNARECT: c2000 cleartrip

Yale Li 李耀先
Expert 4660 points
Part Number: TIEVM-VIENNARECT
Other Parts Discussed in Thread: LAUNCHXL-F28379D, SYSCONFIG

When I use LAUNCHXL-F28379D replace F28379D C2000 Delfino MCU controlCARD, I try to write 1 in Cleartrip for my open loop, no pwm output in my PWM1A pin. What should I do?

  • 0
    TI__Mastermind 23636 points

    Hi Yale,

    What is Cleartrip? Are you using SysConfig? Is there no PWM output at all?

    Double check and verify that you have you your PWM peripheral enabled, TBCLKSYNC is set, and that you're using the correct pins to output the PWM signals

    BEst,

    Ryan Ma