Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 129 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDM-SOLAR-ONEPHINV: -

MOHAMMADASHRAF SHAIKH
Prodigy 20 points
Part Number: TIDM-SOLAR-ONEPHINV
Other Parts Discussed in Thread: TIDM-HV-1PH-DCAC

Dear TI team,

I have single phase inverter board along with F28M35H52C1 control board.  Currently I am following the Design Guide: TIDM-HV-1PH-DCAC Grid Connected Inverter Reference Design (tidub21d.pdf) file on page 26 there is shown one image of Expressions View. I also got Expressions View But, there is 2 PWM parameters shown rad color. How to mitigate this error and even doing referencing, no any parameters updated. What I have to do.