This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28379S: Decoupling of VREF pins

Part Number: TMS320F28379S


What is the recommended method to decouple the Vref pins? I have used a 0.1 Ohm series resistor with a 22uF as implemented in the 28379D control card. I believe the purpose of the resistor is to add some ESR to the caps and act as a bleeder/snubber resistor, in case the trace is long.