After Reset or Power on/off code is not working and getting stuck at memory location
i tried CPU reset and code was at 3fe8f2: 28AD00A0 MOV @SP, #0x00a0
and as i tried running code it stuck at 3fd4d0: 7625 ESTOP0
please help with this .
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
After Reset or Power on/off code is not working and getting stuck at memory location
i tried CPU reset and code was at 3fe8f2: 28AD00A0 MOV @SP, #0x00a0
and as i tried running code it stuck at 3fd4d0: 7625 ESTOP0
please help with this .
Hi Siddharth,
If you have debugger connected, you need to setup the emulation boot properly to run the CPU code. Please refer the emulation boot detail in TRM.
Regards,
Vivek Singh