This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-F28069M: need example files to run with DRV8301

Part Number: LAUNCHXL-F28069M
Other Parts Discussed in Thread: DRV8301, MOTORWARE

Hello,

I have bought launchxl-f28069, and two DRV8301 to start learning motor control.  I tried running GUI composer on one motor to run but it did not work.  Not sure if I can use GUI composer.

How about motorware, can I use some of the examples in the lab to run motors using the above hardware.  I know there are videos out there showing how to run two motors using Simulink, I will do that later.

what can I do?  Please help.

  • Download and install motorware which has many example projects to support this kit, and follow the lab guide to understand these lab projects.

    MotorWare: http://www.ti.com/tool/motorware

     

    Please take a look at guides in the folders below in motorWare, and follow the guides to set up the kits and run the lab.

    C:\ti\motorware\motorware_1_01_00_18\docs\labs\instaspin_labs.pdf

    C:\ti\motorware\motorware_1_01_00_18\docs\boards\kits\docs\readmefirst_instaspin_launchboost.pdf